Bidirectional rectifier to perform battery deep discharging.

Large color LCD touch-pad for user interface.

Export of all the recorded events using USB flash drive.

Reduced CAPEX - Upstream transformer, switchgear and cables are downsized thanks to high input power factor, low THDi rejection and low inrush current.

Proven digital Vector Control technology to control the output waveform, even on non linear loads.

Lower power consumption thanks to high efficiency.

Innovative design allowing an easy front access to all components.

Removable ID Cards which safeguard the UPS parameters and facilitate control board replacement.

Configurable active mimic diagram.

Fit-for-purpose battery selection.

Galvanic isolation: either output and/or input transformers.

Wide range of electrical and mechanical options.

3 X 400 V (380, 415) (other available on request)

+/- 10%

50 Hz (60 Hz)

+/- 5%

≤ 10 x ln (other available on request)

1 x 230 V (220, 240) ; 1 x 110 V (115, 120) (other available on request)

3 x 400 V (380, 415) ; 3 x 220 V (200, 208, 230) (other available on request)

50 Hz (60 Hz)

+/- 0.05%

+/- 3 % (from 1 to 5% adjustable)

Voltage stability (for 0 to 100 % load variation) : Static

VFI SS 111 as per IEC/EN 62040-3, class 1

150 % of nominal power

125 % of nominal power

250 % / 100 ms - 175 % / 5s

315 % / 100 ms - 220 % / 5s

190 % / 100 ms - 135 % / 5s

< 3%

SS as per IEC/EN 62040-3

0.5 lagging to 0.5 leading

Salt Metal Chloride, Lead acid or nickel cadmium, vented or recombination

From few minutes to several hours, on request

0.1 C (lead-acid battery) / 0.2 C (nickel-cadmium battery)

0 to 40 °C (-20°...55°C on request)

-20 to +70°C

< 95% non condensing

1000m max without derating (other available on request)

Forced ventilation

Up to 90% according to rating

IP 20 according to IEC 60529 (other available on request)

Protection against unintentional direct contact, as per IEC 60590-1/62477-1

Grey RAL 7032 (other available on request)

Varying according to ratings and options

5 / 10 / 20 / 30 / 40 / 50 / 60 kVA

10 / 20 / 30 / 40 / 50 / 60 / 80 / 100 / 120 / 160 / 200 / 250 / 320 / 400 / 500 kVA

40 / 50 / 60 / 80 / 100 / 120 / 160 / 200 / 250 / 320 / 400 / 500 kVA

Uninterruptible power systems (ups) - Part 1: Safety requirements

Uninterruptible power systems (UPS) -Part 2: Electromagnetic compatibility (EMC) requirements

Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements

Low voltage switchgear and controlgear assemblies - Part 1: General rules

Degrees of protection provided by enclosures (IP Code)

Power transformers - Part11: Dry type transformers

2006/95/EC and 2014/35EU

2004/108/EC and 2014/30/EU

Yes

Refer to datasheet in download section